Description
H12 Pro FlexReach
All-in-one Vacuum and Mop
Cleaning System
Leaves 0 Tangles* Behind
Minimizes Water Streaks to 0.2g
Traditional Mops
Obvious Water Streaks
Wood floors are at
risk of mold and odor buildup, swelling, and
warping.
H12 Pro FlexReach
Nearly Invisible Streaks (0.2g*)
Leaves
fewer water residuals behind to safeguard
your floors.
One Charge
6 × 4,000mAhBattery Pack
3200ft²Area
50minRuntime
780mLClean Water Tank
Pipe Cleaning
Dual Rotating Brush +
Heated Wash
High-Speed Spinning +
Hot Air
Dry & Fluffy Brush
Dual Rotating Brush Easily Detangles Hair
Cleaning
Smart Mode for
general stains
Turbo Mode for
tough stains
Suction Mode for
heavy liquid stains
Quiet Mode for
quieter operation
Conquers Stains under Beds and Sofas
Thanks to the omni wheel on the back, you can easily swivel left and right when you lay the vacuum flat. This low-profile wheel keeps the surface scratch-free and saves you from lifting, reducing fatigue.
What's in the Box
Charging Base x1
Charging Base x1
What's in the Box
Charging Base x1
Charging Base x1
NOTE:
*180°, 14cm, 9.6cm: The entire body of the vacuum cleaner can reach spaces as low as 14cm and the brush head as low as 9.6cm. Based on our in-house lab data.*18,000Pa suction: Based on GTT Surface Cleaning & Air Treatment Laboratory. Report No.: 0742-23A-01
*480RPM: Based on our in-house lab data. Report No.: ZMX-231213-009-14
*18,000Pa suction: Based on GTT Surface Cleaning & Air Treatment Laboratory. Report No.: 0742-23A-01
*1,000 tangles: H12 Pro FlexReach was able to clean 1,000 wet hairs, 1,000 dry hairs, 500 wet hairs, and 500 dry hairs separately with no tangles left behind in each round, based on TÜV SÜD (China) Shanghai branch. Report No.: 704012408126-00. Actual usage may vary.
*0.2g water streaks: H12 Pro FlexReach leaves less than 0.2g of watermarks after 4 rounds of mopping a 60cm wooden floor at a speed of 20cm/s, based on our in-house lab testing data. Actual results may vary based on floor type, usage, and environmental conditions
*90°C Hot wash: The heater delivers hot airflow for better self-cleaning results.
*30min/5min 85°C/90°C hot air drying: Under conditions of 20–25°C and 45% RH, based on our in-house lab data. Actual drying temperature may vary.
*To switch between these 2 settings, press the self-cleaning button when you hear the voice prompt indicating the start of self-cleaning.
*50min & 300m²: Based on our in-house lab data under Quiet Mode. Actual runtime may vary.